JRC JMR-5410-4X Instruction Manual Download Page 102

Page: 102 / 688

Section 2 Name and Function of Each Unit

2-6

[Sensor types]

Sensor name

Contents

HDG

Displays the value indicated by the ship’s heading sensor.

STW

Displays the value indicated by the speed through water sensor.

COG/SOG

Displays the value indicated by the speed over the ground sensor.

[Sensor value background colours]

Each background colour represents the following meaning.

Normal colour: Normal sensor value

Yellow: The reliability of the sensor value is deteriorating.

Yellowish orange: The sensor value is abnormal.

[Switching the sensor source]

Select the sensor source in the [Source] combo box. The following sensor sources can be selected.

When [Menu] is selected, the [Sensor Selection/Status] dialogue is displayed.

Sensor name

Sensor source

HDG

MAN (Manual), Gyro, Gyro 1

*1*4

, Gyro 2

*1*4

, MAG (MAG Compass)

, G/C (GPS Compass)

STW

MAN (Manual), Log, Log 1

*2*5

, Log 2

*2*5

COG

Log, Log 1

*2*5

, Log 2

*2*5

, GPSx

, TGT

SOG

*1: Only when there are two Gyros.

*2: Only when there are two Logs.

*3: When two or more GPS units are present, “x” indicates the unit number.

*4: When the gyro compass system equipped with the automatic switching function is used, the display of the

sensor source changes automatically according to the switching condition.

*5: When 1AX is installed in Log, Log cannot be selected from the sensor source.

UTC/Local date and time

This button displays the current date and time.

• When the button is clicked on, the time can be

switched to the UTC time display or Local time

display.

•

Set the time format by selecting

[Maintenance] -

[Date/Time/Time Zone]-[Display Style] on the

menu.

For the details, refer to "15.1.1 Setting

Date/Time/Time Zone".

See the next page.

Sensor information

Various sensor information items are displayed.

Summary of Contents for JMR-5410-4X

















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for JMR-5410-4X

Reviews:

Related manuals for JMR-5410-4X

Brands by name

Popular brands

JRC JMR-5410-4X, Instruction Manual

Search results

Summary of Contents for JMR-5410-4X

Reviews:

Related manuals for JMR-5410-4X

Brands by name

Popular brands