www.modelflight.com.au
– World’s best source of JR products
12F
CCPM SWASHPLATE MIXING
Note
: The CCPM Swashplate Mixing
screen is only displayed when
Swashplate types 2Serv, 3Serv
or 4Serv CCPM are selected in
the Swashplate type Selection in
System Mode.
The CCPM Swashplate Mixing Function
(Cyclic Collective Pitch Mixing) of the
XP6102 is designed to be
used in model helicopters that utilize
2-servo (180°), 3-servo (120°) and
3-servo (90°) type swashplate
control system.
The desired swashplate mixing type must
first be selected at the Swash Type
Selection in System Mode.
If the Swashplate Type option has
not been selected, proceed to
Throttle Cut section.
Go to the Throttle Cut menu
Indicates the CCPM type selected
Indicates servo reversing
Increase/decrease value
or
change reversing value
[120
o
CCPM]
REV
AILE
60%
N
ELEV
60%
N
PIT
60%
N
Go to the Travel Adjustment menu
Change highlighted function
Return highlighted value to default
Screen showing 120° CCPM Swashplate selection
Accessing the Swashplate Type
1. Place the transmitter power switch in
the On position.
2. Access the Function Mode by
pressing the
D o w n
and
Select
keys simultaneously.
3. Press either the
U p
or
D o w n
key until
90° CCPM, 120° CCPM or 180° CCPM
appears in the middle left
portion of the LCD.
Note
: The swashplate type selection is
selected in the System mode on
Page 55.
4. Press the
Select
key until the desired
function is highlighted.
5. Press the (+) or (-) Keys to Increase or
Decrease the CCPM Values.
6. Follow the same procedure for the
remaining channels.
8. Access the
TRAVEL ADJ
function by
pressing the
D o w n
key.
9. Access the
THROTTLE CUT
function
by pressing the
U p
key.
10. Exit the
CCPM SETUP
screen
by pressing the
D o w n
and
Select
keys simultaneously.
68
XP6102 - Helicopter Manual
