www.modelflight.com.au
– World’s best source of JR products
TRAINER FUNCTION
11F
The XP6102 offers a programmable
trainer function with three trainer options:
Normal mode
- In this mode the
transmitter acts as a conventional buddy-
box system. The transmitter can be used
as a slave or as a master: however in
this mode, the reversing switches and
trims must be adjusted so the slave
transmitter matches the master
transmitter. In normal mode, when the
trainer switch is activated, the student has
control of all functions and switches.
Pilot
Link
- When pilot link mode is used with
the master transmitter, it allows the
slave transmitter to be adjusted to factory
defaults. The slave transmitter can simply
be programmed in a model memory not
being used and reset to factory defaults,
thus preventing the need to synchronize
the trims and reversing switches on the
slave transmitter.
Also, when Pilot Link is used, the student
only has control of the 4 basic channels
(throttle, aileron, elevator, rudder) while
the trainer (master) retains control of all
other functions like gear, dual rate,
programmed mixes, etc. This allows a
pilot to have a test flight on a more
complex airplane without having to
remember complex switch positions.
Pilot
Link + Slave
- This mode is used only
when the XP6102 is being used as a
slave transmitter and the other Master
transmitter has a Pilot Link program
active. By selecting Pilot Link + Slave the
transmitter is automatically in the correct
programming mode to work as a slave in
conjunction with another Pilot Link
equipped transmitter.
Model number and name
Change trainer
Go to Switch Select menu
mode
[TRAINER]
#3
VENTURE
NORMAL
Go to Modulation menu
Trainer mode selected
Return to Normal mode
Accessing the Trainer Function
1. Move the power switch to the On
position while pressing the
D o w n
and
Select
keys to access the System
mode.
2. Press either the
U p
or
D o w n
key until
TRAINER
appears at the top of the
LCD.
3. Press either the (+) or (-) keys to
change the Trainer Type type.
4. Pressing the
Clear
key will return the
trainer function to the "normal" setting.
5. Press the
D o w n
key to access the
MODULATION
function.
6. Press the
U p
key to access the
SWITCH SEL
function.
7. To exit the
TRAINER
function, press
the
D o w n
and
Select
keys
simultaneously.
Note
: The slave transmitter must always
be in PPM modulation to operate.
Pilot Link + Slave automatically selects
PPM modulation when activated.
When using other models of transmitters
it will be necessary for the slave
transmitter to be in PPM mode for the
XP6102 to operate properly as a slave.
XP6102 - Helicopter Manual
57
