www.modelflight.com.au
– World’s best source of JR products
6H
THROTTLE CUT SWITCH
This function assigns the Throttle Cut
switch to the push button located on
upper right front of the transmitter. The
Throttle Cut function is designed to
return the throttle trim to the lowest
position instantly and keep this position
while the button is pressed. This feature
is used to “cut” or stop the engine
without changing the position of digital
throttle trim.
Go to Flap System menu
Change value
[THRO CUT]
INHIBIT
Go to Ail
v
Rud Mix
Set function to Inhibit
Accessing the Throttle Cut Function
1. Place the transmitter power switch in
the On position.
2. Access the Function mode. To do so,
press the
D o w n
and
Select
keys
simultaneously. Press either the
U p
or
D o w n
key until
THRO CUT
appears in
the upper portion of the LCD screen.
3. Use the (+) and (-) keys to change the
value of the Throttle cut function.
Note
: Pressing the Clear key will Inhibit
the Throttle Cut, turning it off until it
has been reactivated.
4. Access the
FLAP SYSTEM
mixing
function by pressing the
D o w n
key.
5. Access the
AIL
v
RUD MIX
function by pressing the
U p
key.
6. Exit the
THRO CUT
function
by pressing the
D o w n
and
Select
keys simultaneously.
38
XP6102 - Airplane Manual
