www.modelflight.com.au
– World’s best source of JR products
6F
ELEVATOR TO FLAP MIXING
When this system is active and a value
of flaps is input, the flaps will be
deflected each time the elevator stick is
used. The actual flap movement is
adjustable for both up and down elevator.
A switch can be assigned to turn the
elevator to flap mixing on or off.
Go to Go to Ail
v
Rud Mix
Change value/Select switch
[ELE F MX]
ON
E-DN
0%
E-UP
0%
SW
ALWAYS ON
Go to Travel Adjust menu
Change selection
Reset selection to Default
Accessing the Elevator to Flap Function
1. Place the transmitter power switch in
the On position.
2. Access the Function mode. To do
so, press the
D o w n
and
Select
keys simultaneously.
Press either the Up or Down key until
ELE
v
F MX
appears in the upper
portion of your LCD.
3. Move the elevator stick in the direction
you want to mix with flaps.
Note
: The position indicator will reflect
this change by highlighting the up or
down arrow.
5. Press the (+) or (-) key to increase or
decrease the amount of flaps to be
mixed. If you want to reverse the flap
travel, press the Clear key, bringing the
mixing value to the factory default (0%),
and increase the value using the
opposite key (+) or (-) from the key
originally selected.
6. Once you have adjusted the first
mixing position (up or down), place the
elevator stick in the opposite direction
and follow Step 5 above to adjust the
second elevator mixing value.
7. Access the switch position by pressing
the Select key. Use the (+) or (-) keys
to select from the one of six switches,
or from always on.
8. Access the
TRAVEL ADJ
function by
pressing the
D o w n
key.
9. Access the
AIL
v
RUD MIX
Mixing function by pressing the Up
key.
10. Exit the
ELE
v
F MX
function
by pressing the Down and Channel
36
XP6102 - Airplane Manual
