www.modelflight.com.au
– World’s best source of JR products
CHAPTER 11: SYSTEM MODE • HELICOPTER
NORMAL MODE
11A
When the power switch is in the On
position, the display will read as follows:
Model Type
Model Name
Elevator Trim
Throttle Trim
Model Number
Modulation Type
[MODEL SEL]
#5 HELI
SPCM
VENTURE
TOTAL T
0:22:42
To enter and exit the System mode, press
simultaneously then turn on the power switch.
To enter and exit the Function model, turn on
the power switch, then press simultaneously.
Rudder Trim
Transmitter
"On Time"
Aileron Trim
SYSTEM MODE
11B
To enter the System mode, press the
Down and Channel keys simultaneously,
then turn the power switch to the on
position. The display will show the last
active program. Pressing either the Up or
Down key then scrolls through the
functions one by one, according to the
system mode flowchart shown to the
right. Once the appropriate function is
displayed, changes can be made by
pressing the (+) or (-) keys.
System Mode Flowchart
Information pertaining to each function is
explained on the page listed next to the
function name. Functions will appear in
the same order they are shown on this
chart.
Accessing the System Mode
1. Press the Down and Channel
keys simultaneously.
2. Move the power switch to the On
(upper) position.
3. Use either the Up or Down key to
scroll through the menu and access the
applicable function.
[MODEL SEL]
#5 HELI
SPCM
VENTURE
TOTAL T
0:22:42
[SWASH TYPE]
NORMAL
1SERVO
[SWITCH SEL]
D/R
INDIVID
GEAR
LEFT SW
FL-M
LEFT SW
[TRAINER]
#3
VENTURE
NORMAL
[MODULATION]
#5
ALPHA 40
SPCM
[MODEL COPY]
#3
VENTURE
#2
HELI
SPCM
[MODEL TYPE]
#3
VENTURE
HELICOPTER
DATA RESET
[MODEL NAME]
#5
HELI SPCM
VENTURE
Model
Selection
pg 54
Swash
Type
pg 55
Switch
Select
pg 56
Trainer
pg 57
Modu-
lation
pg 58
Model
Copy
pg 59
Model
Type
pg 60
Model
Name
pg 61
XP6102 - Helicopter Manual
53
