www.modelflight.com.au
– World’s best source of JR products
5J
MODEL SELECTION
The XP6102 system offers memory for
ten completely separate models.
Therefore, it is possible to have a mixture
of helicopter and airplane setups
retained in memory. It is also
recommended that the Model Name
Entry function be used in conjunction
with each model setup. Another very
useful function of the Model Selection
function is the ability to set one aircraft
up several different ways. This is helpful
when multi-task performance is desired.
Go to Model Name menu
Model Number and Type
Change model selection
[MODEL SEL]
#4 PLANE
SPCM
ALPHA 40
TOTAL T
0:05:27
Go to Wing Type menu
Toggle between Model
and Timer
Model Name (if programmed)
Clear Timer (when selected)
Accessing the Model Select Function
1. While pressing the
D o w n
and
Select
keys, switch the transmitter
to the On position to enter the
Model Select mode.
2. Model Select will be displayed on the
upper left portion of the LCD. If not,
press the
U p
or
D o w n
key until
MODEL SEL
is displayed.
3. Pressing the (+) or (-) key will select
among each of the ten models
available. Notice that as each model is
selected, its name appears in the LCD.
4. Once the desired model is displayed
on the left, pressing the
D o w n
and
Channel
keys simultaneously will
exit the Model Selection function and
establish the model displayed as the
new current model.
5. Press the
Select
key to select the timer
function to clear the Total Timer. Press
the
Clear
key to clear the Total timer.
6. Press the
D o w n
key to access the
WING TYPE
function.
7. Press the
U p
key to access the
MODEL NAME
function.
8. Press the
D o w n
and
Select
keys simultaneously to exit the
MODEL SEL
function.
30
XP6102 - Airplane Manual
