www.modelflight.com.au
– World’s best source of JR products
CHAPTER 5: SYSTEM MODE • AIRPLANE
NORMAL MODE
5A
When the power switch is in the On
position, the display will read as follows:
Model Type
Model Name
Elevator Trim
Throttle Trim
Model Number
Modulation Type
[MODEL SEL]
#4 PLANE
SPCM
ALPHA 40
TOTAL T
0:05:27
To enter and exit the System mode, press
simultaneously then turn on the power switch.
To enter and exit the Function model, turn on
the power switch, then press simultaneously.
Rudder Trim
Transmitter
"On Time"
Aileron Trim
SYSTEM MODE
5B
To enter the System mode, press the
D o w n
and
Select
keys simultaneously,
then turn the power switch to the on
position. The display will show the last
active program. Pressing either the
U p
or
D o w n
key then scrolls through the
functions one by one, according to the
system mode flowchart shown to the
right. Once the appropriate function is
displayed, changes can be made by
pressing the (+) or (-) keys.
System Mode Flowchart
Information pertaining to each function
is explained on the page listed next to
the function name. Functions will appear
in the same order they are shown on this
chart.
Accessing the System Mode
1. Press the
D o w n
and
Select
keys
simultaneously.
2. Move the power switch to the On
(upper) position.
3. Use either the
U p
or
D o w n
key to
scroll through the menu and access the
applicable function.
[MODEL SEL]
#4 PLANE
SPCM
ALPHA .40
TOTAL T
0:05:27
[WING TYPE]
FLAPERON
OFF
ELEVON
OFF
V-TAIL
OFF
[SWITCH SEL]
D/R
INDIVID
GEAR
RIGHT SW
FLAP
FLAP LVR
[TRAINER]
#5
ALPHA 40
NORMAL
[MODULATION]
#5
ALPHA 40
SPCM
[MODEL COPY]
#5
ALPHA 40
#6
PLANE SPCM
[MODEL TYPE]
#5
ALPHA 40
AIRPLANE
DATA RESET
[MODEL NAME]
#5
PLANE SPCM
ALPHA 40
Model
Selection
pg 30
Wing
Type
pg 20
Switch
Select
pg 24
Trainer
pg 25
Modu-
lation
pg 26
Model
Copy
pg 27
Model
Type
pg 28
Model
Name
Entry
pg 29
XP6102 - Airplane Manual
19
