www.modelflight.com.au
– World’s best source of JR products
12D
SUB TRIM
The Sub Trim Adjustment function
allows you to electronically fine-tune
the centering of your servos. Individually
adjustable for all six channels with
a range of ±125% (+/-30 degrees
servo travel).
The sub trim functions provide precise
servo arm neutral positioning if rotating
the servo arm will not allow the desired
servo arm position.
Go to Travel Adj menu
Change value
[SUB TRIM]
TH
0
AI
0
EL
0
RU
0
GE
0
FL
0
Go to Reversing SW menu
Select channel
Reset selection to default
Accessing the Sub Trim Function
1. Place the transmitter power switch in
the On position.
2. To Access the Function mode, press
the
D o w n
and
Select
keys
simultaneously.
3. Press either the
U p
or
D o w n
key until
SUB TRIM
appears in the upper middle
portion of the LCD.
4. Press the
Select
key until the desired
channel appears.
5. Press the (+) or (-) key to establish
the desired amount and direction of
Sub-Trim.
Caution
: Do not use excessive sub-trim
adjustments since it is possible to
overrun your servo’s maximum Sub
Trim. Remember that it is a trim
convenience function. It is not
intended to take the place of the
proper mechanical trim adjustments
that are necessary on any RC model.
6. Access the
REVERSING SW
function
by pressing the
D o w n
key.
7. Access the
TRAVEL ADJ
function by
pressing the Up key.
8. Exit the
SUB TRIM
function by
pressing the
D o w n
and
Select
keys simultaneously.
66
XP6102 - Helicopter Manual
