www.modelflight.com.au
– World’s best source of JR products
TRAVEL ADJUST
6E
The purpose of Travel Adjust is to offer
you precise servo control deflection in
either direction of servo operation. The
XP6102 offers travel adjust for all six
channels. The Travel Adjust range is from
0–150% (0 degrees to 60 degrees) from
neutral, or center, and it can be adjusted
for each direction individually. The factory
default (Data Reset) value is 100% for
each direction of servo travel.
Go to Ele
v
F MX
Change value
[TRAVEL ADJ]
THRO
AILE
H100%
L100%
L100%
R100%
Go to Sub Trim menu
Select channel to Adjust
Reset value to Normal
Accessing the Travel Adjust Function
1. Place the transmitter power switch in
the On position.
2. Access the Function mode by
pressing the
D o w n
and
Select
keys simultaneously.
3. Press either the
U p
or
D o w n
key until
TRAVEL ADJ
appears in the upper
portion of the LCD.
4. Press the
Select
key until the desired
channel is highlighted.
5. Move the appropriate control stick
(lever, switch, etc) to the right or left of
center to the direction of travel you
want to adjust. An arrow to the left of
the travel adjust value will reflect the
current position to be adjusted.
6. After the control stick or switch is
placed in the direction of travel to be
adjusted, press the (+) or (-) key until
the proper amount of servo travel is
shown on the LCD. Press the (+) key to
increase the amount of servo travel.
Press the (-) key to decrease the
amount of servo travel.
7. Follow the same procedure for the
remaining channels.
8. Access the
SUB TRIM
function by
pressing the
D o w n
key.
9. Access the
ELE
v
F MX
function
by pressing the
U p
key.
10. Exit the
TRAVEL ADJ
function
by pressing the
D o w n
and
Select
keys simultaneously.
XP6102 - Airplane Manual
35
