5-9
TAIL BOOM BRACE ASSEMBLY
5-10
TAIL BOOM BRACE/HORIZONTAL FIN INSTALLATION
32
2.6x12mm Socket Head Bolt
Tail Brace Tube
It is suggested that the Tail Brace
Connectors be bonded to the Tail
Brace Tubes using either thick CA
Adhesive or JB Weld.
2.6x12mm
Socket Head Bolt
For easy installation, insert these two nuts
into the Horizontal Fin/Brace Clamp first.
3mm Lock Nut (4 pc)
Dome Nut (2 pc)
Parts Assembled
in Step 5-9.
3x30mm Set Screw
(Use Threadlock)
Horizontal Fin
3x12mm Socket
Head Bolt
3x8mm Socket
Head Bolt
It is suggested that decals be applied
to the horizontal fin prior to assembly.
Use rubbing alcohol to remove oil,
etc., before attaching decals.
Tail Brace Connector (4 pc)
TWO SETS REQUIRED
Caution: Be sure to note correct lengths
of 3mm Socket Head Bolts
during assembly.
2.6x12 Socket Head Bolt
........4 pc
Use Threadlock
Z,Q
Z,Q
Main Frame Standoff,
80mm
........2 pc
........2 pc
........2 pc
........4 pc
....1 pc
3x8mm Socket Head Bolt
3x10mm Socket Head Bolt
3x12mm Socket Head Bolt
3mm Washer
3x30mm Set Screw
3x10mm Socket
Head Bolt (2pc)
3mm Washer
3mm Lock Nut
........4 pc
........2 pc
Dome Nut
Main Frame Standoff, 80mm
........1 pc
Summary of Contents for Ergo Z230
Page 43: ...43 TEAM JR DECAL PLACEMENT Tail Boom Body Stabilizer Fin ...
Page 71: ......
