40
Pr.45,46,47
FUNCTION
COMMENT
53
IDC-LEVEL3
Idc>AI3 (PDA/PDH series only)
54
IRMS-LEVEL1
Irms>AI1
55
IRMS-LEVEL2
Irms>AI2
56
IRMS-LEVEL3
Irms>AI3
57
POWER-LIMIT
Under Power-Limit status (PDAN series only)
58~69
Reserve
70
RUN & AI1-Compare-HIGH
RUNNING & AI1 > Pr.74
71
RUN & AI1-Compare-LOW
RUNNING & AI1 < Pr.74
72
RUN & AI2-Compare-HIGH
RUNNING & AI2 > Pr.75
73
RUN & AI2-Compare-LOW
RUNNING & AI2 < Pr.75
74
RUN & AI3-Compare-HIGH
RUNNING & AI3 > Pr.76
75
RUN & AI3-Compare-LOW
RUNNING & AI3 < Pr.76
76~77
Reserve
78
OL-WARNING
OL level >50%
79
/OL-WARNING
OL level <50%
80
AI1-Compare-HIGH
AI1 > Pr.74
81
AI1-Compare-LOW
AI1 < Pr.74
82
AI2-Compare-HIGH
AI2 > Pr.75
83
AI2-Compare-LOW
AI2 < Pr.75
84
AI3-Compare-HIGH
AI3 > Pr.76
85
AI3-Compare-LOW
AI3 < Pr.76
86
ACCELERATING
Under acceleration status
87
DECELERATING
Under Deceleration status
88
DISCHARGING
Under Discharging status
89
Reserve
90
FWD
FORWARD RUNNING
91
REV
REVERSE RUNNING
92
TMOC
TMOC ENABLE AFTER TMIC ON
93
/TMOC
Same as DOx(43)
Note: When power on, or the inverter will executing INITIALIZE function, all of the outputs will go OFF for a short
period of reset.
9.0 NULL function
The output status of DOx will always under
OFF state
when selecting this mode.
This function is complement function of
Always ON
function. Refer to Sec.9.38.
This function is useful when a master computer controls the inverter. The master computer can control these digital
outputs for other peripheral, independent to the inverter operation.
9.1 NOT RUNNING function (complement of Sec.9.7)
The output status of DOx will be
ON
when the inverter is under
standby
mode.
Inverter under standby mode means the output transistors are all OFF.
If the inverter starts
running or under DC injection braking
mode, the output status will become OFF.