34/69
Docum
ent
1
0000
028
013
-DO
C
-00
0-0
0-EN
we know what‘s cooking
If a program is cancelled, all functions will continue in their current mode. This means that no functions
will be activated/deactivated.When a program is running, it will respond to manual key presses. This has
three important consequences:
•
The kettle can be used normally whilst the program is running. The user can therefore add water to
the kettle or adjust the temperature if desired while the program is running.
•
Many aspects of the program execution can be altered. If for example the program switches on the
heating and the user then turns it off again by pressing
for the heating, the kettle will not heat its
contents. If the next step depends on a particular temperature, the program will not continue to the
next step.
•
If the given action is impossible, the program will continue. If for example the program is set to start
the stirrer but the lid is open, the stirrer will switch to pause mode and the program will continue.
It is important to be aware of the operation of the kettle when it is running a program, so as not to acci-
dentally cancel an operation.
Generally the program display shows the time.
If
is pressed, the active program and variant will be shown.
If
is pressed, the remaining time for the current program step will be shown.
The remaining time can be adjusted using the arrows.If the current program step has no remaining time,
‘----’ will be shown in the program display.
If
is pressed, the active program step will be shown.
Programs for AutoTemp 56
The following tables describe the function of each program and the parameters that must be set.
Program 1
This program stops the heating and stirrer and activates the beeper when the required time has elapsed.
Program 2
This program stops the heating and stirrer and activates the beeper when the required time has been
reached.
Program 3
This program starts the heating and stirrer. After the required period of time, the temperature set point,
heating power, stirring pattern and RPM are altered. This could be used, for example, for cooking fol-
lowed by warm-keeping.
Step Action
Parameter
1
Pause for required time
P01.1 Time
2
Turn off heating
3
Switch off the stirrer
4
Activate beeper
Step Action
Parameter
1
Pause until set time is reached
P01.1 Time
2
Turn off heating
3
Switch off the stirrer
4
Activate beeper
