we know what‘s cooking
25/69
Docum
ent
1
0000
028
013
-DO
C
-00
0-0
0-EN
Timer
Only applies to AutoTemp 32 and 36
Fig. 0-19 Timer, AutoTemp 32 and 36
1
Key for timer signal
2
Key for time signal
3
Display for remaining time/time
4
LED for timer on
The Timer function enables the heating/chilling function to be switched off either at a particular time or
after a remaining period of time. The beeper and display are also activated and the LED will flash.
The signal lasts for ten seconds, but can be stopped by pressing either
or
.
If the Timer function is not active, the current time will be shown on the display.
The Timer is activated automatically if a time or remaining time is set. The LED will illuminate when the
function is activated.
The Timer is deactivated by holding down
or
for three seconds.
Setting the time for the signal
Press
so that the display and LED flash slowly. Set the required time using the arrow keys.
If the Timer function is active, the current signal time will be shown.
The function will be exited automatically after three seconds without a key press or if another function is
selected.
Setting the remaining time before the signal
Press
so that the display and LED flash slowly. Set the required time using the arrow keys.
If the Timer function is active, the current remaining time will be shown.
The function will be exited automatically after three seconds without a key press or if another function is
selected.
