we know what‘s cooking
23/69
Docum
ent
1
0000
028
013
-DO
C
-00
0-0
0-EN
Start the filling of the required quantity by pressing
so that the LED illuminates and the quantity is
counted down. Filling will stop automatically when the required quantity reaches 0.
The filling process can be interrupted by pressing
sagain so that the LED extinguishes. The remaining
quantity can now be adjusted using the arrows.
The display will automatically disappear after 10 minutes without use or if
is held down for three sec-
onds..
Operation of time-specific measurement
Press
so that the display flashes and set the required time using the arrow keys. The time is set in
minutes and seconds. The large arrows change the minutes by 1 and the small arrows change the sec-
onds by 1.
The function will be exited automatically after three seconds without a key press or if another function is
selected.
The display will now show the required time. If you want to adjust the required time you must press
again.
Start the filling process for the required time by pressing
so that the LED illuminates and the quantity
is counted down. Filling will stop automatically when the required time reaches 0.
The filling process can be interrupted by pressing
again so that the LED extinguishes. The remaining
time can now be adjusted using the arrows.
The display will automatically disappear after 10 minutes without use or if
is held down for three sec-
onds.
Manual water filling
This function enables the user to fill the kettle with water by holding down a key.
When
is pressed, water will be added to the kettle. The quantity added or time will be counted on the
display, depending on the settings.
Filling will stop when
is released.
If
is pressed again within three seconds, the counting of the quantity added will continue.
If
is not pressed again within three seconds, the function will be exited and any set quantity will be
shown on the display.
AutoTemp 16
Water filling is controlled using the part of the panel shown in the following illustration.
Fig. 0-17 Water filling, AutoTemp 16
1
Key for manual water filling
2
Key for continuous water filling
Manual water filling
This function enables the user to fill the kettle with water by holding down a key.
When
is pressed, water will be added to the kettle.
Filling will stop when
is released.
Continuous water filling
