we know what‘s cooking
33/69
Docum
ent
1
0000
028
013
-DO
C
-00
0-0
0-EN
1) Press
so that the program display flashes and select program 4 using the large arrows and the
variant using the small arrows.
2) Press
tweice to alter parameter P02.1. The water display shows P02.1. The time is set in the pro-
gram display using the arrow keys. Press
when the value has been set.
3) The water display shows P03.1. The water quantity is set in the program display using the arrow
keys. Press
when the value has been set.
4) The water display shows P04.1. The food temperature is set in the program display using the arrow
keys. Press
when the value has been set.
5) The water display shows P04.2. The heating power is set in the program display using the arrow
keys. Press
when the value has been set.
6) The water display shows P06.1. The stirring pattern is set in the program display using the arrow
keys. Press
when the value has been set. If stirring pattern 0 is selected, skip this step and jump
to P07.1
7) The water display shows P06.2. The Stirring rate is set in the program display using the arrow keys.
Press
when the value has been set.
8) The water display shows P07.1. The time is set in the program display using the arrow keys. Press
when the value has been set.
9) The water display shows P08.1. The food temperature is set in the program display using the arrow
keys. Press
when the value has been set.
10) The water display shows P08.2. The heating power is set in the program display using the arrow
keys. Press
when the value has been set.
11) The water display shows P09.1. The stirring pattern is set in the program display using the arrow
keys. Press
when the value has been set. If stirring pattern 0 is selected, skip this step and jump
to step 13.
12) The water display shows P09.2. The Stirring rate is set in the program display using the arrow keys.
Press
when the value has been set.
13) The program display flashes ‘----’ and the new values are saved.
14) Press
to start the program.
Running the program
Press
to start the program and the variant that is shown in the program display. The LED will illumi-
nate while the program is being run.
Press
and hold the key down for three seconds to stop the program. The LED will extinguish when
the program is cancelled.
8
Set the set point for food temperature and heating
power
P08.1 Food temperature
P08.2 Heating power
9
Set stirring pattern and stirring RPM
Switch on the stirrer
P09.1 Stirring pattern
P09.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped.