we know what‘s cooking
35/69
Docum
ent
1
0000
028
013
-DO
C
-00
0-0
0-EN
Program 4
This program adds water to the kettle and starts the heating and stirrer at a set time. After the required
period of time, the temperature set point, heating power, stirring pattern and RPM are altered. This could
be used, for example, to automatically start cooking followed by warm-keeping.
Program 5
The program stirs the contents of the kettle for a set period of time. The kettle then stirs at a second RPM
setting and stirring pattern for a set period of time. The stirrer is then stopped and the beeper activat-
ed.This program could be used, for example, to stir desserts, etc., where the stirring rate or pattern needs
to be altered during the process.
Step Action
Parameter
1
Switch to heating mode
2
Set the set point for food temperature and heating
power
P02.1 Food temperature
P02.2 Heating power
3
Switch on heating
4
Set stirring pattern and stirring RPM
Switch on the stirrer
P04.1 Stirring pattern
P04.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
5
Pause for required time
P05.1 Time
6
Set the set point for food temperature and heating
power
P06.1 Food temperature
P06.2 Heating power
7
Set stirring pattern and stirring RPM
Switch on the stirrer
P07.1 Stirring pattern
P07.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped
Step Action
Parameter
1
Switch to heating mode
2
Pause until set time is reached
P02.1 Time
3
Add water in required quantity
P03.1 Water quantity
4
Set the set point for food temperature and heating
power
P04.1 Food temperature
P04.2 Heating power
5
Switch on heating
6
Set stirring pattern and stirring RPM
Switch on the stirrer
P06.1 Stirring pattern
P06.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped.
7
Pause for required time
P07.1 Time
8
Set the set point for food temperature and heating
power
P08.1 Food temperature
P08.2 Heating power
9
Set stirring pattern and stirring RPM
Switch on the stirrer
P09.1 Stirring pattern
P09.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped.
