Jolimark DP320, User Manual

Page: 9 / 45

DP320 User's Manual
- 5 -
6. Insert the ribbon cartridge into the printer as the following figure shown; then press both
sides of the cartridge down firmly to fit the plastic hooks into the printer slots.
7. Use hands or other auxiliaries, to guide the ribbon between the print head and metal patch.
Turn the ribbon-tightening knob to feed the ribbon into place, it should not be twisted or
creased.
8. Slide the print head from side to sideseveral times to make sure it moves smoothly.
9. Reinstall and close the printer cover.
NOTE: 1. When your printing becomes faint, you need to replace the ribbon cartridge.
Otherwise, the print quality will be infected and the printhead may be
damaged.
2. To remove the old ribbon cartridge, first make sure the power is turned off,
move the printhead to the center of the printer. Then grasp the ribbon
cartridge handle on either side and lift it out of the printer. Install a new one
follow the above steps.
Metal patch
Print head
Figure1-10 Tighten the ribbon
Figure1-11 Install ribbon cassette
Figure1-12 Guide the ribbon between the print head and metal patch