Jolimark DP320, User Manual

Page: 15 / 45

DP320 User's Manual
- 11 -
1.9.2 Connecting to the USB Interface
1. Plug the A plug of the USB cable (square shape) into the printer's USB interface.
2. Plug the B plug of the USB cable (flat shape) into the computer's USB interface.
1.9.3 Connecting to the Serial Interface
1. Turn off both the computer and the printer. Plug the serial cable connector securely into the
printer’s serial interface. Tighten the screws on either side of the connector.
2. Guide the interface cable through the slot on the side of the printer so that it does not block the
paper supply.
3. Plug the other end of the cable into the computer’s serial interface; then tighten the screws on
either side of the connector.
1.10 Installing Driver
The Driver CD provides the printer drivers for Microsoft Windows 98, Windows 2000/XP and
Vista. Please use the cable to connect the computer with the printer, then turn on the computer
and the printer, put the driver CD into the CD-ROM. Install driver by the following way:
Auto-install way
Double click the file “Setup.exe” in the driver disc, install driver by the following direction.
Note: Auto-install way just work in operating system of Windows2000 or above.
Hand-operated install way
The installing steps for Windows 2000/XP/Vista are as follows
1. Click “Start” -->"Settings", select "Printers".
USB interface
Serial interface
Figure1-26 Connect to the USB cable
Figure1-27 Connect to serial interface