Jolimark DP320, User Manual

Page: 18 / 45

DP320 User's Manual
- 14 -
Chapter 2 Control Panel Operations
You can use the four keys on the control panel to operate your printer.
2.1 LED Description
LED ON FLASH OFF
ONLINE
ONLINE Micro-Adjust OFFLINE
LED 1, 2
Indicate rhe printer state
POWER
（
Red
） TURN ON PAPER OUT TURN OFF
2.2 Basic Control Panel Operations
You can use the four keys on the control panel to operate your printer.
2.2.1 In the Continuous Paper Mode
TEAR
1. In the offline mode, if the paper is at the print position, press
TEAR
key once and the printer feeds
paper to the tear position.
2. In the offline mode, if the paper is at the tear position, press
TEAR
key once and the printer ejects
paper to the next page or the original print position of the current page.
LF/FF
In the offline mode, if the paper is at the print position, press the
LF/FF
button once (less than 0.5
second), the printer will feed the paper one line base on line spacing current set. Alternatively, hold the
LF/FF
button down, the printer will eject the single sheet paper.
LOAD/EJECT
1. When the paper is at the ready position, press
LOAD/EJECT
once, the paper will be fed into the
original print position automatically.
2. When the paper is at the original print position, press
LOAD/EJECT
in the offline mode, the paper
will return the ready position.
3. When the paper is at the general print position (not the original print position), press
LOAD/EJECT
once in the offline mode less than 0.5 seconds, the paper is ejected one line. Alternatively, hold the
LOAD/EJECT
button down, the printer will eject more than a single sheet paper. If the paper ejected
is less than one page, the paper will go back to the ready position.
4. When the paper is at the tear position, press
LOAD/EJECT
once, the printer will eject the single
sheet paper.
ONLINE
1. If the printer has loaded paper in the offline mode, press the key to enter
ONLINE
mode, the
Figure2-1 Control pannel