Johnson & Johnson ASP STERRAD 100S, Installation Manual

Page: 17 / 44

Chapter 2. For Your Safety
STERRAD
®
100S Installation Guide 17
•
Ingestion can produce injury that may be life threatening. If
swallowed, drink plenty of water immediately to dilute. Do not
induce vomiting. Consult a physician.
•
If hydrogen peroxide comes into contact with organic material (such
as greasy surfaces) it can be a fire hazard.
Safe Maintenance
•
Repairs and adjustments should only be attempted by experienced
technicians who are fully trained to maintain and repair the
STERRAD 100S Sterilizers.
•
Use of unauthorized parts for maintenance or repair could cause
personal injury, result in costly damage or unit malfunction, and void
the warranty.
•
Do not clean the chamber door area with abrasives. The sterilization
chamber uses an O-ring vacuum seal to maintain a vacuum in the
chamber. Never use rough cleaning tools, such as a wire brush or
steel wool, on the door housing or chamber assembly. This could
damage the seal.
•
Do not change the power source without checking the electrical
phase rotation. Prior to relocating the sterilizer to a new power
source, electrical phase rotation should be checked. Failure to verify
and match phase rotation may cause damage to the sterilizer.