Jetter JM-105, User Manual, Page: 80 / 106

7 Description of Connections
80 Jetter AG
7.10 Digital and Analog Inputs and
Outputs
Specification of the Female Connector for Male Connector X62
(IN / OUT)
• 15-pin high density SUB-D connector (female)
• Metallized enclosure
• For using the analog inputs, shielding is required
Input / Output Cable
JetMove 105
(female Sub-D
connector X62)
Shield Specification
of the cable
If the analog input is
used:
Connect shield with the
greatest possible
surface area!
Use metallized
housing only!
Attaching screws must
have a metric thread!
Pin Signal Description Specification
1 0 V *)
2 Brake Contacts for the motor
holding brake
The brake output can be
operated either by the
control program or by the
operating system of the
JetMove 105 at release of
the motor current.
The JetMove 105 is
equipped with an internal
freewheeling diode.
The internal
semiconductor switch
connects the +V
LOG
with the output pin.
I
max
= DC 0.5 A
Contact: N/O
These connections are
only for devices having
got the same reference
to ground as the power
supply of the logic.
3 Analog input+ Analog signal 0 - 10 V to pin 4
4 Analog input- Reference of the analog
signal
not connected with
0 V of the motion
system
1
6
11
5
10
15
Shield