Jetter JM-105, User Manual, Page: 52 / 106

7 Description of Connections
52 Jetter AG
7.3 Servo Motor
Specification of Terminal X1
• 8-pin screw clamping terminal (type MC 1.5/ 8-ST-3.5)
• Diameter of the cable apt for connecting: 0.14 - 1.5 mm
2
with bootlace ferrules and plastic sleeve: 0.25 - 1 mm
2
• Bladed screw-driver: 0.4 x 2.5 mm
• Stud torque for the screw clamping terminal: 0.22 Nm
Specification of the Motor Cable
• Cable size: 4 * 1.00 mm²
• Material: Copper
• Temperature class: 60 °C
• Stripping length of cores: 6 mm
• Cable shielding: Braided copper shield of 80 % coverage min.
• Maximum cable length: 50 m
As of a line length of 40 m, we recommend using a motor line reactor at the JM-
105 (see "Motor line reactor to be mounted on the DIN rail, screwing connection",
page 93)
Motor connection
Terminals X1 on the
amplifier side
Signal Specification
U2 Motor phase 1 Motor cable
V2 Motor phase 2 Motor cable
W2 Motor phase 3 Motor cable
BALLAST Ballast resistor An optional ballast resistor can be
connected between this terminal and
ground.
PE PE conductor The PE conductor is connected to
the enclosure.