Jetter JM-105, User Manual, Page: 28 / 106

3 Operating Conditions
28 Jetter AG
Operating Parameters
Mechanical Parameters
Parameter Value(s) Reference Standard
Free Falls
Withstanding Test Within original packing, the device
withstands dropping over all of its
edges DIN EN 50178
DIN EN 60068-2-31
Vibration resistance • 10 Hz ... 57 Hz: 0.075 mm
amplitude
• 57 Hz ... 150 Hz: 1 g
acceleration:
• 1 octave per minute, 10
frequency sweeps (sinusoidal),
all three spatial axes
DIN EN 50178
DIN EN 60068-2-6
Degree of
protection IP20 DIN EN 60529
Mounting
Orientation Vertical or horizontal
Please make sure there is a
clearance of at least 25 mm under
and above the JetMove - sufficient
ventilation must be granted.
Important!
Measures to avoid damages in transit and storage:
The packaging material and the storage place are to be chosen in a
way that the values given in the above table “Operating Parameters
Mechanical Parameters” on page 28 are kept to.
Operating Parameters
Electrical Safety
Parameter Value(s) Reference Standard
Protection Class III DIN EN 61800-5-1
Dielectric strength Protective network conductor and
network logics: 380 V DC, 5 s DIN EN 61800-5-1
Isolation Protective network conductor and
network logics: > 1 M
at 500 V
DIN EN 61800-5-1
Protective
Connection < 60 V, 25 A, 0.1 DIN EN 61800-5-1
Overvoltage
category I DIN EN 61800-5-1
DIN EN 50178
DIN VDE 0110-1
UL 508C
Ω
Ω