Jetter JM-105, User Manual, Page: 15 / 106

JetMove 105 1.3 Residual Dangers
Jetter AG 15
1.2.3 Earthing procedure
1.3 Residual Dangers
1.3.1 Hazards during Operation
Screw the enclosure of the digital servo amplifier JetMove 105 down to a
highly conducting, plane and earthed panel.
Connect the earthing terminal (X1:PE) to an earth point of low impedance.
Use a short line of a great cross-section.
Warning
WARNING! Hot Surfaces!
During operation, the surfaces, respectively the heat sinks of the servo amplifier
JetMove 105 can heat up. The left sidewall and the rear panel can reach
temperatures of up to 85 °C.
Do not touch the left sidewall or rear panel of the servo amplifier
JetMove 105 during operation and after switching off, while the
device is still cooling down.
Make sure that no temperature-sensitive parts have been connected or
fastened to the servo amplifier JetMove 105.
Warning
DANGER in a potentially explosive atmosphere!
Do not operate the digital servo amplifier JetMove 105 in a potentially
explosive atmosphere.