Jetter JM-105, User Manual, Page: 27 / 106

JetMove 105
Jetter AG 27
3 Operating Conditions
Operating Parameters
Power Rating
Parameter Value(s) Reference Standard
Power rating Power section at X1:+Vmot
24 / 48 V DC (12 ... 48 V DC)
SELV or PELV
I
max.
= 27.5 A
Logic section at X1:+Vlog
24 V DC (12 ... 40 V DC)
SELV or PELV
I
max.
= 250 mA at 24 V
Fluctuations of
power supply Voltage dips
3 ms max.
Operating Parameters
Environment
Parameter Value(s) Reference Standard
Environmental
conditions Temperature:
0 °C to +40 °C (+40 °C to +50 °C:
Derating 2.5 %/K)
Air humidity:
5 % to 85 %, non-condensing
Make sure the control cabinet is
being cooled sufficiently. DIN EN 50178
Storage conditions
(units within
packing) Temperature: -25 °C bis +55 °C,
maximum fluctuation: 20 K/h
Air humidity:
5 % to 95 %, non-condensing
Maximum storage period:
< 1 year without restrictions DIN EN 50178
Transport
conditions (units
within packing) Temperature: -25 °C to +70 °C
Air humidity:
5 % to 95 %, non-condensing DIN EN 50178
Pollution degree 2 DIN EN 50178
Corrosion
Immunity/Chemical
Resistance No special protection against
corrosion. Ambient air must be free
from higher concentrations of acids,
alkaline solutions, corrosive agents,
salts, metal vapors, or other
corrosive or electroconductive
contaminants -
Max. operating
altitude Up to 1,000 m above sea level.
From 1,000 to 2,500 m above sea
level: derating of 1.5% per 100 m
increase in alitude DIN EN 50178