Jetter JM-105, User Manual, Page: 11 / 106

JetMove 105 1.1 General Safety Instructions
Jetter AG 11
Contents
1 Safety Instructions
1.1 General Safety Instructions
The digital servo amplifier JetMove 105 meets the applicable safety regulations and
standards. Special emphasis was given to the safety of the users.
Further, the user should adhere to the following regulations:
• pertinent accident prevention regulations;
• accepted safety rules;
• EC guidelines and other country-specific regulations.
1.1.1 Intended Conditions of Use
Usage according to the intended conditions of use includes operation in accordance
with these operating instructions.
The digital servo amplifier JetMove 105 may only be operated in the closed
control cabinet and within the range of the set values, see chapter 5 "Technical
Specifications", page 35.
Do not apply a voltage to the digital servo amplifier JetMove 105 that is higher
than the specified operating voltage.
The operating voltage for motor supply by the digital servo amplifier JetMove 105
ranges between 12 V and 48 V DC. Thus, the digital servo amplifier is not subject to
the EG Low Voltage Directive.
The servo amplifier JetMove 105 is for driving electric motors of various
designs. The winding insulation of the motors must be higher than, or at least
equal to, the DC link voltage supplied by the servo amplifier.
The digital servo amplifier JetMove 105 is used to drive machinery, such as
conveyors, production machines, and handling machines.
1.1.2 Usage Other Than Intended
This digital servo amplifier must not be used in technical systems which to a
high degree have to be fail-safe, e.g. ropeways and aeroplanes.
Do not use the integrated braking circuit in applications, where, in case of
braking circuit failure, safety hazards can occur.
The servo amplifier JetMove 105 is not a safety-relevant device according to
the machinery directive 2006/42/EG. Therefore, using this servo amplifier for
safety-relevant applications as regards safety of persons is neither adequate
nor permitted.