Jetter JM-105, User Manual, Page: 59 / 106

JetMove 105 7.3 Servo Motor
Jetter AG 59
7.3.5 Motor Cable Permanently Fixed to the
Motor
The motor cable is used for the variant “Motor with screw clamping terminals and
cables with male connectors” on page 55.
Specification of the Motor Power Cable without Mating
Connector
For connection without motor holding brake
Motor Power Cable Fixed to the Motor
Terminals of the
JetMove 105
Shield Motor
7 x 1.0 mm
2
Shielded, highly flexible 6-wire cable with PE.
The wires are
equipped with wire end
ferrules.
Connect shield with the
greatest possible surface
area!
Pin Wire Number Signal
X1.U2 1 Phase 1
X1.V2 2 Phase 2
X1.W2 3 Phase 3
X1.PE Yellow-green PE conductor