Jetter JM-105, User Manual, Page: 57 / 106

JetMove 105 7.3 Servo Motor
Jetter AG 57
Cable Specification of the Motor Power Cable with
Mating Connector SC for JetMove 105
For connection without motor holding brake
Dimensions of the motor mating connector are specified in millimeters.
Motor Power Cable KAY_0626_xxxx
Terminals of the
JetMove 105
Shield Mating
connector of the
motor (female,
solder side)
4 x 1.0 mm
2
Shielded, highly
flexible 4-wire
cable with PE.
The wires are
equipped with wire
end ferrules.
Connect both sides of the shield with
the greatest possible surface area!
Use metallized housing only!
Pin Wire Number Signal Pin
X1.U2 1 Phase 1 1
X1.V2 2 Phase 2 5
X1.W2 3 Phase 3 2
X1.PE Yellow-green PE conductor
mating
connector
solder side
solder side
18
26
65
5
2 4
6
1