e40
ADMINISTRATOR
m
enu
SYSTEM SETTING
Wiring method of key zones
Key zones:
33
-
40
wired zones can be programmed as key
zones, Press * and hold for 3 seconds, enter
administrator password [#]+[6][#]+[1][#]+
[zone number] +[#]+[7][#].
When the zone is programmed as key zone,
the panel status will be same as current key
zones status when power on instead of rest
oring to the status before power off.
If there
is more than one key zones, then the panel
status will be the same as the key zones with
maximum number.
Control
panel
Control
panel
access Key
access Key
LEGENDA
Zone:Zone Terminal
GND: Common Terminal
SW: Switch
Eol:resistor
Note: Key Zone :
Only for wired zones/sensors nr. 33-40.
used for access control.
The selection Key zone <<zona chiave>> disables the burglar function
1, Open circuit is to arm
short circuit is to disarm
2, Open circuit is to disarm
short circuit is to arm
User can program the zone typ
e (1-6)
, when the zone is triggered, the
panel will report the preset zone type information of triggered zone
to
Supervisory Institute
CMS.
Hint: When the zone type is programmed as 0,
m
eans the zone is
disabled/bypassed.
The circuit open automatically arms the control panel in
contrary case , the control panel is normally off.
