Direct commands
(available on DISARM Status only)
Disable telephone line trouble control------------------------747410#
Enable telephone line trouble control ----------------------- 747411#
Disable magnetic sensors inspection control---------------- 747413#
Enable magnetic sensors inspection control --------- ------ 747412#
Disable setting bell only in zone 32---------------------------- 858510#
Enable setting bell only in zone 32 -----------------------------858511#
Disable Siren during telephone line trouble event---------- 858512#
Enable siren during telephoneline trouble event ---------- 858513 #
3.3 Alarm alert through telephone dialer
When the detector is triggered, the panel will sound alarm and display the
triggered zone number and alarm type on the LCD screen. The panel will
dial the preset voice numbers if there is no disarming operation during this
period.When the panel dial the preset voice numbers, if there is no operation
or not disable the alarm by pressing
the
key
1 or 0
, then the panel will
continue
to call other voice numbers
.
Alarm report
The panel will dial the
preset telephone number
off-hook
Alarm receiving
After you type the command
the control panel answer : Succesfull operation
1
Alarm occurs, please operate as
following indication
2
3
4
5
6
7
0
Cancel the alarm press 1
Check alarm zone press 2
Listen to the spot press 3
Disarm the system press 4
Arm the system press 5
Activate the hoot press 6
Play the
recorded message again
Hand up press 0
e17
BASIC SETTING & OPERATION
