INSTALLATION & WIRING
2.1 Preparing the system
Open the package and check that the product is complete
with all accessories.
2.2 Installation of the system
Positioning and installation of control panel.
Before proceeding with the installation of the control panel , please pay
attention to the following points :
* The control panel should be placed in a secure place not easily accessible
to intruders, but easily accessible for its management by the user for
programming operations, arming and disarming.
*. The control panel should be installed and fixed on a wall or horizontally on
a shelf, do not cover the ccontrol panel, since it is provided with a built-in
siren and in case of intrusion of the sound combination of the built in and
the external confuse the intruder.
*. The control panel shall be installed at a convenient height between 1.5
and 1.7 m comfortable for the daily operations access.
*. Locate a position close to a power socket 220Volt for connecting the AC /
DC adapter to the control panel and near to a telephone socket in order to
connect the cable to the built-in telephone dialer.
Note
: It is recommended in case of families with children, install the unit at
recommende height or somewhere far away from any possible tampering in
order not to provoke fake alarm .
We recommend:
To place the control panel near the entrance of the main door so that the
user can hear the arm /disarm tone and voice guide of the alarm system..
*. To place the control unit in the entrance area protected by the magnetic
contact sensor , or by motion detection sensor to protect the control unit
from any illegal intrusion. In this way, the intruder will be obliged to pass
through the protected area before accessing the control panel.
The Installing Your system and the connections are simple and do not require
opening the control panel. Installing the control panel.
2. Installation & Connections
If missing accessories , please contact the dealer.
e10
