![jeiko JKAL300PLUS Manual Download Page 104](http://html.mh-extra.com/html/jeiko/jkal300plus/jkal300plus_manual_641801104.webp)
e49
SPECIFICATION
10.1 Regular test
Design of components of the system is to reduce maintenance cost,
but still it is suggested that periodical check may be carried out.
10.2 The cleanliness of control main machine
Main control panel maybe be stained by fingers or covered by dust
after using for a while. Use soft cotton cloth or sponge to clean it.
ATTENTION: Don't use any lubricant, liquor such as kerosene,
acetone and strong gel which will damage appearance and the top
transparency of window.
DK Digitalia Italia srl hereb declares that the ALLGUARD JKAL300
system is in compliance wi the essential requirements and other provisions
of the Radio & Telecommunication Terminal Equipment (R&TTE)
directive ,1999/5/EC.
Although the products is a high standard products, there is also some
limitation of them such as false alarm or no alarm, the reasons may be
below:
Lack of Maintenance. The system needs maintenance and test regularly
test. The sensitive of the detectors may decrease and the siren may not
whistle.
Lack of power supply If no power input and the back up power is not
enough, the panel can not work normally.
Telephone Line False If the telephone line is cut, the panel could not
send alarm signals
Limitation of Smoke Detectors if the smoke is far from the smoke detector,
the detector could not alarm
If the intruder break in through some door or window not monitored, or
some one knows hot to make the system not work,
10. Maintenance
11. Limitation of the Product
Declaration
52