Example: Set inspection of detector loss or power status every 18hours
Press [*] and hold on for 3 seconds
Enter 2 digit number from 0 to 24 h, add 0 if lower than 10. Like, 9 enter as 09
Example : Set panel communicate with CMS every 4 hours.
Setting the communication interval time to :00 and 24 the comunication
test will not be carried out.
Press[ ] and hold on for 3 seconds
*
Enter 2 digit number from 0-23hours,add 0 if lower than 10. Like, 9 enter as 09
4.6.6 Interval test setting for monitoring sensors and detectors :
Time interval between the signal presence sensors control (factory
default is 00).Allows the control panel supervising the sensors
and alert you incase of Low battery or other malfunctions.
*
6
7
8
9
#
4
6
1
8
ENTER
ENTER
ENTER
4.6.7 Set communication inspection interval time
: Time interval
for panel communicate with Supervisory Institute CMS
(Default value is 00).
*
6
7
8
9
#
4
7
0
4
ENTER
ENTER
ENTER
Setting is saved
Setting is saved
Enter 0-24hours interval on
detector loss inspection, 0 for not
inspect.Press back key to exit .
Press confirm key to save.
Enter 0 to 24 hours interval
on communication inspec-
tion,0 for not inspect.Press
back key to exit .Press co-
nfirm key to save.
e34
ADMINISTRATOR
m
enu
SYSTEM SETTING
