manualshive.com logo in svg

Jeep Patriot 2011, Owner'S Manual

The Jeep Patriot 2011 Owner's Manual is a comprehensive guide that allows you to maximize your vehicle's potential. This manual provides detailed instructions on maintenance, troubleshooting, and operating the Jeep Patriot 2011. Download it for free from our website, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

SAFETY TIPS

Transporting Passengers

NEVER TRANSPORT PASSENGERS IN THE CARGO
AREA.

WARNING!

•

Do not leave children or animals inside parked
vehicles in hot weather. Interior heat build-up may
cause serious injury or death.

•

It is extremely dangerous to ride in a cargo area,
inside or outside of a vehicle. In a collision, people
riding in these areas are more likely to be seri-
ously injured or killed.

•

Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts.

•

Be sure everyone in your vehicle is in a seat and
using a seat belt properly.

Exhaust Gas

WARNING!

Exhaust gases can injure or kill. They contain carbon
monoxide (CO), which is colorless and odorless.
Breathing it can make you unconscious and can
eventually poison you. To avoid breathing (CO),
follow these safety tips:

Do not run the engine in a closed garage or in confined
areas any longer than needed to move your vehicle in or
out of the area.

If it is necessary to sit in a parked vehicle with the engine
running, adjust your heating or cooling controls to force
outside air into the vehicle. Set the blower at high speed.

84

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for Patriot 2011











































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Patriot 2011

Accel 2020 Installation Instructions preview
2020
Brand: Accel Pages: 2
Daihatsu Mira Manual preview
Mira
Brand: Daihatsu Pages: 340
Falcon 1990 Installation Instructions And Specifications preview
1990
Brand: Falcon Pages: 8
JASTEC von-S2 Instruction Manual preview
von-S2
Brand: JASTEC Pages: 12
Bimmer Jakes FRONT HEADLIGHT LENS COVER Replacement Manual preview
FRONT HEADLIGHT LENS COVER
Brand: Bimmer Jakes Pages: 4
Subaru 2005 Baja Owner'S Manual preview
2005 Baja
Brand: Subaru Pages: 34
Tessera4x4 SOT-1311 ROLL Installation Manual preview
SOT-1311 ROLL
Brand: Tessera4x4 Pages: 20
Gator GRM430EM User Manual preview
GRM430EM
Brand: Gator Pages: 6
Rostra RearSight 250-8308 Installation Instructions preview
RearSight 250-8308
Brand: Rostra Pages: 2
Jeep Grand Cherokee SRT 2019 Owner'S Manual preview
Grand Cherokee SRT 2019
Brand: Jeep Pages: 656
Metra Electronics 99-5026 Installation Instructions Manual preview
99-5026
Brand: Metra Electronics Pages: 20
Mazda 3 Facelift 2006 Training Manual preview
3 Facelift 2006
Brand: Mazda Pages: 94
Whispbar K723W Fitting Instructions Manual preview
K723W
Brand: Whispbar Pages: 77
Wald Black Bison Sports Series Installation Manual preview
Black Bison Sports Series
Brand: Wald Pages: 7
American muscle 71324 Manual preview
71324
Brand: American muscle Pages: 3
Yakima MegaWarrior Instruction Manual preview
MegaWarrior
Brand: Yakima Pages: 8
ZeroRPM IMS2 Operator'S Manual preview
IMS2
Brand: ZeroRPM Pages: 41
VER-MAC PCMS-1210 QS User Manual preview
PCMS-1210 QS
Brand: VER-MAC Pages: 44

Brands by name

Popular brands

Load more brands