Jeep Patriot 2011 Owner'S Manual Download Page 439

Page: 439 / 490

Rear Tail, Turn Signal And Backup Lamps

1. Raise the liftgate.

2. Remove the two push-pins from the taillamp housing.

3. Grasp the taillamp and pull firmly to disengage the
light from the aperture panel.

4. Twist and remove socket from the light.

5. Remove bulb from socket and replace.

License Lamps

1. Use a screw driver to gently pry against the side of the
snap tab to remove the lamp from the liftgate.

2. Rotate the socket 1/4 turn counterclockwise.

3. Pull the bulb from the socket.

Center High-Mounted Stoplamp

This light is an LED assembly. See your authorized dealer
for replacement.

MAINTAINING YOUR VEHICLE

437

Summary of Contents for Patriot 2011











































































































































































































































































































































































































































































































Search results

Summary of Contents for Patriot 2011

Reviews:

Related manuals for Patriot 2011

Brands by name

Popular brands

Jeep Patriot 2011, Owner'S Manual

Search results

Summary of Contents for Patriot 2011

Reviews:

Related manuals for Patriot 2011

Brands by name

Popular brands