manualshive.com logo in svg

Jeep Patriot 2011, Owner'S Manual

The Jeep Patriot 2011 Owner's Manual is a comprehensive guide that allows you to maximize your vehicle's potential. This manual provides detailed instructions on maintenance, troubleshooting, and operating the Jeep Patriot 2011. Download it for free from our website, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

WARNING!

•

Use only manufacturer’s recommended brake
fluid. Refer to “Fluids, Lubricants, and Genuine
Parts” in “Maintaining Your Vehicle” for further
information. Using the wrong type of brake fluid
can severely damage your brake system and/or
impair its performance. The proper type of brake
fluid for your vehicle is also identified on the
original factory installed hydraulic master cylin-
der reservoir.

(Continued)

WARNING! (Continued)

•

To avoid contamination from foreign matter or
moisture, use only new brake fluid or fluid that
has been in a tightly closed container. Keep the
master cylinder reservoir cap secured at all times.
Brake fluid in a open container absorbs moisture
from the air resulting in a lower boiling point.
This may cause it to boil unexpectedly during hard
or prolonged braking, resulting in sudden brake
failure. This could result in a collision.

•

Overfilling the brake fluid reservoir can result in
spilling brake fluid on hot engine parts, causing
the brake fluid to catch fire. Brake fluid can also
damage painted and vinyl surfaces, care should be
taken to avoid its contact with these surfaces.

(Continued)

422

MAINTAINING YOUR VEHICLE

Summary of Contents for Patriot 2011











































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Patriot 2011

Camcar 40104 Mounting Instructions preview
40104
Brand: Camcar Pages: 6
VEAP SHIELD UNITED FT Series Mounting Instruction preview
FT Series
Brand: VEAP SHIELD UNITED Pages: 3
Hama 00201510 Operating Instructions Manual preview
00201510
Brand: Hama Pages: 40
GMC Envoy XUV 2004 Getting To Know Manual preview
Envoy XUV 2004
Brand: GMC Pages: 20
Whispbar K728W Fitting Instructions Manual preview
K728W
Brand: Whispbar Pages: 85
Bestop 614.04 Installation Manual preview
614.04
Brand: Bestop Pages: 31
Linear Logic scangauge2 Quick Start Manual preview
scangauge2
Brand: Linear Logic Pages: 8
AutoLoc SB3PR Series User Manual And Installation Manual preview
SB3PR Series
Brand: AutoLoc Pages: 6
Ford Fusion 2019 Supplement Manual preview
Fusion 2019
Brand: Ford Pages: 51
Volvo 31339699 Installation Instructions, Accessories preview
31339699
Brand: Volvo Pages: 18
OMNISTOR Omni-Bike Sport Ducato Installation preview
Omni-Bike Sport Ducato
Brand: OMNISTOR Pages: 5
Classic Accessories OVER DRIVE PolyPRO 3 Car Cover Instructions preview
OVER DRIVE PolyPRO 3 Car Cover
Brand: Classic Accessories Pages: 2
Vmac A700308 Installation Manual preview
A700308
Brand: Vmac Pages: 16
T-Tech FIT417 Service Bulletin preview
FIT417
Brand: T-Tech Pages: 1
Panavise Indash 75114-296 Installation Instructions preview
Indash 75114-296
Brand: Panavise Pages: 2
Edelbrock 4789 Installation Instructions preview
4789
Brand: Edelbrock Pages: 2
Toyota Sienna 2000 Operating Manual preview
Sienna 2000
Brand: Toyota Pages: 277
Chevrolet El Camino 1983 Owner'S Manual preview
El Camino 1983
Brand: Chevrolet Pages: 103

Brands by name

Popular brands

Load more brands