Jeep Patriot 2011 Owner'S Manual Download Page 78 | Manualshive

Page: 78 / 490

background image

WARNING!

Rearward-facing child seats must never be used in
the front seat of a vehicle with a front passenger air
bag. An air bag deployment could cause severe
injury or death to infants in this position.

Older Children And Child Restraints

•

Children who weigh more than 20 lbs (9 kg) and who
are older than one year can ride forward-facing in the
vehicle. Forward-facing child seats and convertible
child seats used in the forward-facing direction are for
children who weigh 20 to 40 lbs (9 to 18 kg) and who
are older than one year. These child seats are also held
in the vehicle by the lap/shoulder belt or the LATCH
child restraint anchorage system. Refer to

⬙

LATCH —

Child Seat Anchorage System (Lower Anchors and
Tether for CHildren)

⬙

.

•

The belt-positioning booster seat is for children weigh-
ing more than 40 lbs (18 kg), but who are still too small
to fit the vehicle’s seat belts properly. If the child
cannot sit with knees bent over the vehicle’s cushion
while the child’s back is against the seatback; they
should use a Belt Positioning Booster Seat. The child
and booster seat are held in the vehicle by the lap/
shoulder belt.

NOTE:

For additional information, refer to

www.seatcheck.org or call 1–866–SEATCHECK. Cana-
dian residents should refer to Transport Canada’s web-
site for additional information: http://www.tc.gc.ca/
roadsafety/safedrivers/childsafety/index.htm

76

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
76
77
78
79
80
...
»

Summary of Contents for Patriot 2011











































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Patriot 2011

Gemineye EC2014-C

Brand: Ecco Pages: 10

Reflex 5500 Series

Brand: Ecco Pages: 12

Brand: Suzuki Pages: 353

Brand: Torklift Pages: 16

Brand: Cargo Floor Pages: 16

Brand: Hama Pages: 40

Brand: EUFAB Pages: 52

Brand: Saab Pages: 288

Brand: Sunsky Pages: 9

Dodge Challenger SRT8®Challenger SRT8 392 2012

Brand: Dodge Pages: 5

Brand: Edelbrock Pages: 2

Brand: Volvo Pages: 24

Brand: Mercedes-Benz Pages: 358

Brand: ULTIMATE SPEED Pages: 32

Brand: Chevrolet Pages: 441

THERAPEDIC 2000

Brand: Columbia Pages: 14

EQ forfour 2018

Brand: SMART Pages: 224

WG Grand Cherokee 2002

Brand: Jeep Pages: 74

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands