Jeep Patriot 2011 Owner'S Manual Download Page 269

Page: 269 / 490

mode. In Play mode, the following buttons on the radio
faceplate may be used to control the iPod

威

or external

USB device and display data:

•

Use the TUNE control knob to select the next or
previous track.

•

Turning it clockwise (forward) by one click, while
playing a track, skips to the next track or press the
VR button and say

⬙

Next Track

⬙

•

Turning it counterclockwise (backward) by one
click, will jump to the previous track in the list or
press the VR button and say

⬙

Previous Track

⬙

•

Jump backward in the current track by pressing and
holding the <<

button. Holding the <<

button long enough will jump to the beginning of
the current track.

•

Jump forward in the current track by pressing and
holding the

>> button.

•

A single press backward <<

or forward

>> will

jump backward or forward respectively, for five
seconds.

•

Use the <<

SEEK

and

SEEK

>> buttons to jump to the

previous or next track. Pressing the

SEEK

>> button

during play mode will jump to the next track in the
list, or press the VR button and say

⬙

Next or Previous

Track

⬙

•

While a track is playing, press the

INFO

button to see

the associated metadata (artist, track title, album, etc.)
for that track. Pressing the

INFO

button again jumps

to the next screen of data for that track. Once all
screens have been viewed, the last

INFO

button press

will go back to the play mode screen on the radio.

•

Pressing the

REPEAT

button will change the audio

device mode to repeat the current playing track or
press the VR button and say

⬙

Repeat ON

⬙

Repeat

Off

⬙

UNDERSTANDING YOUR INSTRUMENT PANEL

267

Summary of Contents for Patriot 2011











































































































































































































































































































































































































































































































Search results

Summary of Contents for Patriot 2011

Reviews:

Related manuals for Patriot 2011

Brands by name

Popular brands

Jeep Patriot 2011, Owner'S Manual

Search results

Summary of Contents for Patriot 2011

Reviews:

Related manuals for Patriot 2011

Brands by name

Popular brands