manualshive.com logo in svg

Jeep Patriot 2011, Owner'S Manual

The Jeep Patriot 2011 Owner's Manual is a comprehensive guide that allows you to maximize your vehicle's potential. This manual provides detailed instructions on maintenance, troubleshooting, and operating the Jeep Patriot 2011. Download it for free from our website, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

Reclining Rear Seat — If Equipped

For additional comfort, pull the strap forward just
enough to release the seatback latch. Then push the
seatback to a reclined position, approximately 35 degrees
maximum, and release the strap.

WARNING!

Do not ride with the seatback reclined so that the
shoulder belt is no longer resting against your chest.
In a collision you could slide under the seat belt and
be seriously or even fatally injured. Use the recliner
only with the vehicle is parked.

TO OPEN AND CLOSE THE HOOD

To open the hood, two latches must be released.

1. Pull the hood release lever located on the left kick
panel.

Hood Release Lever

146

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Patriot 2011











































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Patriot 2011

Feniex AM600 Instruction Manual preview
AM600
Brand: Feniex Pages: 6
Yamaha Yamaha Rhino 660 Instruction Supplement preview
Yamaha Rhino 660
Brand: Yamaha Pages: 3
MAXWORKS 70275 Instruction Manual & Parts Catalogue preview
70275
Brand: MAXWORKS Pages: 7
Ford 2001 Explorer Owner'S Manual preview
2001 Explorer
Brand: Ford Pages: 256
Buick Electra 225 1965 Service Manual preview
Electra 225 1965
Brand: Buick Pages: 914
Car-Systems Parktronic system Volkswagen Golf MK7 Assembly Manual preview
Parktronic system Volkswagen Golf MK7
Brand: Car-Systems Pages: 10
DriveRight 8156OBD Installation Manual preview
8156OBD
Brand: DriveRight Pages: 16
Caltrend LY115 Installation Instructions preview
LY115
Brand: Caltrend Pages: 3
Thetford SANICON TURBO 300 Operating Instructions Manual preview
SANICON TURBO 300
Brand: Thetford Pages: 25
JSPORT JSRLP024 Installation Instructions preview
JSRLP024
Brand: JSPORT Pages: 2
HAKR TRIP 3 Instructions For Use Manual preview
TRIP 3
Brand: HAKR Pages: 9
Yakima Landing Pad 11 Manual preview
Landing Pad 11
Brand: Yakima Pages: 28
Cadillac 2000 DeVille Service Manual Addendum preview
2000 DeVille
Brand: Cadillac Pages: 19
Motoalliance Denali MA11737 Manual preview
Denali MA11737
Brand: Motoalliance Pages: 4
Kargo Master 80070 Instruction Manual preview
80070
Brand: Kargo Master Pages: 17
Jeep 2014 All vehicles Warranty Information Booklet preview
2014 All vehicles
Brand: Jeep Pages: 44
Fortin Electronic Systems EVO-CAN Suggested Wiring Configuration preview
EVO-CAN
Brand: Fortin Electronic Systems Pages: 5
Camcar 40072 Mounting Instructions preview
40072
Brand: Camcar Pages: 2

Brands by name

Popular brands

Load more brands