Jeep Compass, Owner'S Handbook Manual

Page: 301 / 322

299
PHONE MODE
Phone mode activation
Press the “Phone” button on the display
to activate the Phone mode.
NOTE To consult the list of mobile
phones and supported functions, visit
the www.driveuconnect.eu website
Use the graphic buttons on the display
to:
dial the phone number (using the
graphic keypad on the display);
display and call the contacts in the
mobile phone phonebook;
viewing and calling contacts from
recent call logs;
pair up to 10 phones/audio devices to
make access and connection easier and
quicker;
transfer calls from the system to
the mobile phone and vice versa and
deactivate the microphone audio for
private conversations.
The mobile phone audio is transmitted
through the car’s sound system; the
system automatically mutes the
Uconnect™ system audio when the
Phone function is used.
Pairing a mobile phone
WARNING Carry out this operation
only with car stationary and in safety
conditions; this function is deactivated
when the car is moving.
The pairing procedure for a mobile phone
is described below: always consult the
handbook for the mobile phone in any
case.
To pair the mobile phone, proceed as
follows:
activate the Bluetooth® function on the
mobile phone;
press the “Phone” button on the
display;
if no phone is paired with the system
yet, the display shows a dedicated
screen;
access “Settings” and select “Add
device” to start the pairing procedure,
then search for the
Uconnect™
device on
the mobile phone;
when prompted by the mobile phone,
use its keypad to enter the PIN code
shown on the system display or confirm
on the mobile phone the PIN displayed;
during the pairing stage a screen is
displayed showing the progress of the
operation;
when the pairing procedure is
completed successfully, a screen is
displayed: answer "Yes" to the question
to pair the mobile phone as favorite (the
mobile phone will have priority over
all other mobile phones to be paired
subsequently). If no other devices are
paired, the system will consider the first
paired device as favorite.
NOTE After updating the phone software,
for proper operation, it is recommended
to remove the phone from the list of
devices linked to the radio, delete the
previous system pairing also from the list
of
Bluetooth®
devices on the phone and
make a new pairing.
Making a phone call
The operations described below can
only be accessed if supported by the
mobile phone in use. For all functions
available, refer to the mobile phone
owner's handbook.
A call can be made by:
selecting "Phonebook"
selecting "Recent";
selecting "Dial";
selecting "Redial".
Favorites
You can add a number or a contact (if
already in Contacts) to the favorite list
during a call by pressing one of the 5
"Empty" graphic buttons on the upper
part of the display. The favorites can also
be managed by using the Phonebook
options
SMS Message Reader
The system can read the messages
received by the mobile phone. To use
this function, the mobile phone must
support the SMS exchange function
through Bluetooth® .
If this function is not supported by the
phone, the corresponding "Text" button is
deactivated (grayed out).
When a text message is received, the
display will show a screen where the
options "Read", "Show", "Call" or "Ignore"
can be selected.