Jeep Compass, Owner'S Handbook Manual

Page: 191 / 322

189
Removing the mounting screw and
removing the fuse box cover
Proceed as follows:
1. Slowly turn the screw (1) fig. 134
counterclockwise.
2. Slowly release the screw.
3. Remove the fuse cover (2) by sliding
it upward.
Fuse puller
To replace a fuse, use the puller
attached to the cover of the engine
compartment fuse box (see fig. 135).
135
5520463D
Grab the pliers from the upper tabs,
as shown in fig. 136, press them and
extract the pliers pulling upwards.
136
5520464D
The pliers have two different ends,
specifically designed (see fig. 137)
to remove the different types of fuse
present in the vehicle:
A
: MINI fuse
B : J-CASE fuse.
137
5520465D
Fitting the fuse box cover and securing the
screw
Proceed as follows:
1. Properly secure the fuse cover to the
box, slide completely from top to bottom.
2. Fully depress the screw, using the
special screwdriver supplied.
3. Slowly turn the screw clockwise.
4. Release the screw.
Battery fuse cover
Unlock the tabs (1) fig. 138 and lift the
cover (2).