Jeep Compass, Owner'S Handbook Manual

Page: 109 / 322

107
Customer action Effect of the action
1. Turn the ignition
device to the OFF
position. (The
direction indicator
switch must be
placed in neutral
state).
2. Turn the ignition
device to the RUN
position.
Right direction
indicator light
BLINKS. Left
direction indicator
light is OFF.
3. Activate the right
direction indicator;
Right direction
indicator light is
ON SOLID. Left
direction indicator
light BLINKS.
4. Place the
direction indicator in
neutral state.
Right direction
indicator light is
OFF. Left direction
indicator light
BLINKS.
5. ACTIVATE the left
direction indicator
Right direction
indicator light
BLINKS. Left
direction indicator
light is ON SOLID.
6. Place the
direction indicator in
neutral state.
Right direction
indicator light
BLINKS. Left
direction indicator
light is OFF.
Customer action Effect of the action
7. Activate the right
direction indicator;
Right direction
indicator light is
ON SOLID. Left
direction indicator
light BLINKS.
8. Place the
direction indicator in
neutral state.
Right direction
indicator light is
OFF. Left direction
indicator light
BLINKS.
9. ACTIVATE the left
direction indicator
Right direction
indicator light is ON
SOLID. Left direction
indicator light is ON
SOLID.
10. DEACTIVATE
the left direction
indicator (The
direction indicator
switch must be
placed in neutral
state).
Right direction
indicator light is
OFF. Left direction
indicator light is
OFF.
11. Turn the ignition
device to the OFF
position.
12. Turn the ignition
device to the RUN
position. (Entire
sequence needs
to be completed
within one minute or
sequence will need
to be repeated).
System is now reset
and the engine may
be started.
Customer action Effect of the action
Turn hazard flashers
OFF (Manually).
If a reset procedure step is not
completed within 60 seconds, then the
direction indicators will blink and the
reset procedure must be performed again
in order to be successful.
Airbag maintenance
169) 170) 171)
Event Data Recorder (EDR)
This car is equipped with an Event Data
Recorder (EDR). The main purpose of
an EDR is to record, in certain crash
or near crash-like situations, such
as an airbag deployment or hitting a
road obstacle, data that will assist in
understanding how the systems of the
car performed. The EDR is designed to
record data related to car dynamics and
safety systems for a short period of time,
typically 30 seconds or less. The EDR in
this car is designed to record such data
as:
How various systems in your car were
operating.
Whether or not the driver
and passenger safety belts were
buckled/fastened.
How far (if at all) the driver was
pressing the accelerator and/or brake
pedal.