Jeep Compass, Owner'S Handbook Manual

Page: 289 / 322

287
the AUX output socket the system starts
reproducing the AUX source connected,
if it is already playing.
Adjust the volume using the VOLUME
button/knob on Uconnect™ front panel or
using the volume adjustment control on
the connected device.
The "AUX Volume Offset" function can be
selected in “Audio” settings only when
the AUX source is active.
USB charge port
(where provided)
Some versions have a USB charging port
on the rear of the central tunnel.
WARNING After using a USB recharging
socket, we recommend disconnecting the
device (smartphone), always removing
the cable from the vehicle socket first,
never from the device. Cables left
flying or connected incorrectly could
compromise correct charging and/or the
USB port status.
IMPORTANT NOTES
The functions of the device connected
with the AUX socket are directly
managed by the device itself: it is not
possible to change track/folder/playlist
or control playing start/end/pause with
the controls on the front panel or on the
steering wheel.
To avoid possible speaker noise, do not
leave the cable of the portable reader
connected to the AUX socket after
disconnection.
PHONE MODE
Phone mode activation
To activate the phone mode and
record/pair the phone to be used (if it
has not already been done), press the
“Phone” button on the display.
Use the graphic buttons on the display
to:
dial the phone number (using the
graphic dial pad on the display);
display and call the contacts in the
phonebook of the mobile phone;
display and call contacts from the
registers of recent calls;
pair up to 10 phones/audio device to
make access and connection easier and
quicker;
transfer calls from the system to
the mobile phone and vice versa and
deactivate the microphone audio for
private conversations.
The mobile phone audio is transmitted
through the sound system of the car; the
system automatically mutes the system
audio when the Phone function is used.
NOTE To consult the list of mobile
phones and supported functions, visit
the www.driveuconnect.eu website
Pairing a mobile phone
Proceed as follows:
activate the Bluetooth® function on the
mobile phone;
Press the "Phone" graphic button on
the display: if no phone is paired with
the system yet, the display shows a
dedicated screen;
select “Yes" to start the pairing
procedure, then search for the
Uconnect™ device on the mobile phone
(if "No" is selected, the Phone main
screen is displayed);
browse the available devices on the
Bluetooth® mobile phone. Press the
“Settings” button on the mobile phone,
then Bluetooth® , making sure it is
activated.
After the activation, the mobile
phone starts searching for Bluetooth®
connections.
during the pairing stage a screen
appears on the display showing the
progress of the operation;
when the pairing procedure is
completed successfully, a screen is
displayed: answer "Yes" to the question
to pair the mobile phone as favorite (the
mobile phone will have priority over
all other mobile phones to be paired
subsequently). If no other devices are
paired, the system will consider the first
paired device as the favorite.
NOTE After updating the phone software,
for proper operation, it is recommended
to remove the phone from the list of
devices linked to the radio, delete the
previous system pairing also from the list
of Bluetooth® devices on the phone and
make a new pairing.