Jeep Compass, Owner'S Handbook Manual

Page: 183 / 322

181
Radio Media
NE
Press and hold icons to drag to menu bar below.
Settings
SOS
SOS
Radio
Media
Clima
Clima
Bussola Controlli
ASSIST
Apps Telefono
Telefono
Impostazioni
Eco
WiFi
Hotspot
Impostaz.
Audio
124
J0A6103
The SOS and ASSIST functions are
active with:
ignition device in RUN position;
ignition device in STOP position and
Uconnect™ system display on.
After the SOS and ASSIST functions
(where provided) have been activated
automatically (where provided) or
manually be pressing the corresponding
button send the position data to the
operational centre and make a voice call
to an operator.
NOTE If the SOS or Assist functions do
not work, the fault in the system will be
indicated on the display. Go as soon as
possible to an authorised workshop to
have the function repaired.
NOTE The correct operation of the SOS
and ASSIST services will be guaranteed
only by a good network coverage.
WARNING The SOS Call and ASSIST
Call functions may not be available for
the first minute after the car is started.
Privacy
: GPS location is always
active, for both SOS and Assist calls.
Deactivating it via the "Settings" menu of
the Uconnect™ system will make some of
the other services unavailable (see the
"Settings" paragraph of the Uconnect™
system for more details).
WARNING The icon at the top of
the Uconnect™ display indicates that
the geo-location function is active
(ON). When geo-location is on, the
vehicle position is tracked to enable
the functions that require it. When
geo-location is off, the vehicle position is
only tracked by the navigation, safety,
insurance and driver assistance systems
(where provided). See the Uconnect™
system "Settings" paragraph to deactivate
the function.
MANUAL SOS CALL
In the event of need, hold the SOS
button on the rear-view mirror fig. 122
pressed for 2 seconds or press the
button fig. 123 on the
Uconnect™
display (where provided).
The LED on the SOS button located on
the ceiling light will turn green once
connected to an SOS operator and will
turn off when the connection is ended.
NOTE If the SOS call button is pressed
by mistake, it is possible to press it
again within 10 seconds to cancel the
operation or press the cancel button on
the Uconnect™ system display.
Once the connection has been
established, the following data will
be automatically transmitted to the
Operations Centre, as authorised by the
customer:
indication that the occupant has made
an SOS call;
the brand of the car;
the most recent known GPS
coordinates of the car.
If you are able to speak to the operator,
do so through the car audio to provide
additional information about the request
for help.
If the system is unable to establish the
voice call, or the line disconnects due to
insufficient coverage, the SOS service
will try to call the operational centre
again for 5 minutes.
If the operational centre needs to contact
the car again, the system can receive an
incoming call, which will be accepted
automatically.
WARNING
When the service expires, you
will not be contacted by any operations
centre and the system will warn you of the
unavailability of the service.
WARNING Any malfunctions detected by
the SOS calling system will be notified:
during the start-up phase;
when the malfunction is detected;
by turning on the red LEDs on the rear-
view mirror and displaying a message on
the display of the Uconnect™ system.