Jeep Compass, Owner'S Handbook Manual

Page: 19 / 322

17
Unlock doors and liftgate
Press and release the (2) fig. 6 or (1)
fig. 7 button on the key once to unlock
the driver's door or twice within five
seconds to unlock all doors and the
liftgate.
With power liftgate:
press the button on
the key fob (4) fig. 6 or fig. 7 twice
within five seconds to open or close the
liftgate.
All doors can be programmed to unlock
on the first press of the
button.
Refer to the “Settings” paragraph in
the “Multimedia” section for further
information.
The direction indicator lights will flash
to acknowledge the unlock signal.
The illuminated entry system will be
activated.
Release button on the first push of the key
This feature lets you program the system
to unlock either the driver's door or
all doors on the first push of the
button on the key fob. To change the
current setting, refer to "Settings" in
"Multimedia" for further information.
Lock doors and liftgate
Press and release the button (3) fig. 6
or (2) fig. 7 on the key fob to lock all the
doors and the liftgate.
If the function is set using the
Uconnect™ system, the direction
indicators will flash to confirm the door
lock. Refer to the “Settings” paragraph
in the “Multimedia” section for further
information.
Request for additional key fobs
WARNING Only Key Fobs that are
programmed to the vehicle electronics
can be used to start and operate the
vehicle. Once a Key Fob is programmed
to a vehicle, it cannot be programmed to
any other vehicle.
Programming the key fob may be
performed by your Jeep Dealership.
Duplication of key fobs may be
performed at your Jeep Dealership. This
procedure consists of programming a
blank key fob to the vehicle electronics.
A blank Key Fob is one that has never
been programmed.
WARNING When having the Sentry Key
Immobilizer system serviced, bring all
car keys with you to the Jeep Dealership.
2) 3)
WARNING
1) Press button (1) only with the key away
from your body, especially your eyes and
from objects which could get damaged
(e.g. your clothes). Do not leave the key
fob unattended to prevent someone,
especially children, from handling it and
inadvertently pressing the button.
2) Always remove the key fobs from the
vehicle and lock all doors when leaving
the vehicle unattended.
3) For vehicles equipped with Keyless
Enter-N-Go, always remember to place
the ignition in the OFF mode.
IMPORTANT
1)
The electronic components inside
the key may be damaged if the key is
subjected to strong shocks. In order
to ensure complete efficiency of the
electronic devices inside the key, it
should never be exposed to direct
sunlight.
IMPORTANT
1) Remote control used batteries may
be harmful to the environment if not
disposed of correctly. They must be
disposed of as specified by law in the
special containers or taken to a Jeep
Dealership, which will take care of their
disposal.