JCM GAMMA VERSUS Series, Manual

Page: 53 / 111

GAMMA VERSUS MANUAL
53
COD. 1257066 Gamma VERSUS Manual v1.13
7.18 Automatic 8K2/optical security edge detection function
Operating After closing security contact inhibition function is configured and enabled, in normal
operation when door is closing when it enters to the security contact inhibition zone any
security contact activation doesn’t produces an inversion maneuver.
Notes Any manipulation or alteration of the closing security contact installation that can modify
its position or presence implies a new control panel programming sequence.
Model All
Associated
parameters
ID Description Type
P5E...P60 IN X INPUT
P29...P31
PDC,PDD
Autodetect OptoEdge INX ON/OFF
Associated errors
ID Description Type
Wr10 Security edge closing active Warning
Wr11 Security edge opening active Warning
Wr37 S. Optical edge opening active Warning
Wr38 S.Optical edge closing active Warning
Description The security edge autotest function allows automatically test the 8K2 wired security
edges (i.e. Radioband external receiver with 8K2 output). The autotest is performed
before every opening and closing maneuvers to ensure that they are correctly working.
P3B SEC.CL inhib.
point
P42 Inhib. Zone
start point
Security contact
inhibit. zone