Teaching Pendant Operation
Desktop Robot JR3000
3.3 Entering Numbers
The cursor blinks on a character or number.
NOTE
The following key operations do not apply to the
entry of position coordinates using numerical
keys. In this situation, refer to “3.5.4 MDI Mode”
in “3.5 Position Entry”.
Cursor
CURSOR ···························· Increases the value. If you release this key within 0.5 seconds, the
value increases by the minimum increment.
If you press this key for more than 0.5 seconds, the value
increases every 0.2 seconds.
CURSOR ···························· Decreases the value. If you release this key within 0.5 seconds,
the value decreases by the minimum increment. If you press this
key for more than 0.5 seconds, the value decreases every 0.2
seconds.
SHIFT + CURSOR ··········· Increases the value at 10 times the rate of the CURSOR
key.
SHIFT + CURSOR ··········· Decreases the value at 10 times the rate of the CURSOR
key.
CURSOR ···························· Shifts the cursor one digit to the left. This key is invalid if the cursor
is on the leftmost digit. If the cursor is hidden, press this key to
display the cursor on the bottommost digit.
CURSOR ···························· Shifts the cursor one digit to the right. If the cursor is on the
bottommost digit, pressing this key hides the cursor. This key is
invalid if the cursor is hidden.
XYZR Offset
Enter a number
X Offset
0
.25mm
Number Entry Screen Example
24
