Teaching Pendant Operation
Desktop Robot JR3000
8.8.7 Delete All
This deletes all the registered programs, point job data, or additional function data. (Additional function
data is deleted by category.)
MENU [Teaching Data Copy, Delete, Conversion]
[Program]
[Delete All Programs]
[PTP Condition Data]
[Delete All PTP Condition Data]
[CP Condition Data]
[Delete All CP Condition Data]
[Tool Data]
[Delete All Tool Data]
[Pallet Routine Data]
[Delete All Pallet Routine Data]
[Workpiece Adjustment Data]
[Delete All Workpiece Adjustment]
[Execute Condition Data]
[Delete All Execute Condition]
[Point Job Data]
[Delete All Point Job Data]
[PLC Data]
[Delete All PLC Data]
Select [Delete All xxxx] to display the delete all
confirmation screen, as shown to the right.
Select [YES], to delete all of the selected data.
NOTE
Point job data numbers 101 and above, and
additional function data and PLC programs
51 and above are included in Customizing
Data and therefore cannot be deleted by
this operation.
TP
All Programs
Delete OK?
YES
NO
Delete All Programs Confirmation Screen
101
