Janome Horizon Memory Craft 15000, Instruction Manual

Page: 98 / 184

Common Setting Mode
q
Screen Contrast
You can adjust the contrast of the visual touch screen by
pressing the “+” or “–” key.
w
Sound Volume
The signal sound can be adjusted by pressing the “+” or “–”
key.
Set the value to “OFF” by pressing the “–” key several
times to mute the signal sounds.
e
Inch/mm Option
You can set your machine’s dimensional unit to either
inches or millimeters by pressing the “inch” or “mm” icon
key.
The default unit is millimeters.
r
Upper Thread Sensor
If you need to run the machine without threads, turn off
the upper thread sensor.
Press the next page key to show the next menu.
t
Sewing Light
The sewing lights can be turned on or off individually,
however the retractable sewing light will always turn on
when extended.
Press the corresponding light keys to turn on or off the
sewing lights.
y
Standby Timer
The sewing lights will turn off and the machine will enter
standby mode if you do not use the machine within the
time period set by this timer. Doing any operation will turn
the lights and screen on again.
The standby timer can be set from 1 to 30 minutes.
If you wish to turn off the timer, press and hold the “+” key
until “OFF” shows in the timer window.
u
Screen Saver
Press the ON/OFF key to turn on the screen saver, and
the visual touch screen will show the screen saver when
the machine is in standby status.
Press the import key to import an original screen saver
from a USB flash drive.
You can create an original screen saver with Screen
Saver Tool included in the Horizon Link Suite CD-ROM.
The imported original screen saver data will be deleted if
the internal memory is formatted (refer to page 96).
i
Import key
Press the next page key to show the next menu.
q
w
e
r
t
y
u
i
93